THIF-114 Water-Based Antirust Agent

This product forms a thin anti-rust film on the surface of iron parts, which has no irritating smell. It is simple to use and has remarkable effect. It is suitable for short-term rust prevention of ferrous metals, for example it can prevent the workpiece from rusting after water blasting rust removal.

This product forms a thin anti-rust film on the surface of iron parts, which has no irritating smell. It is simple to use and has remarkable effect. It is suitable for short-term rust prevention of ferrous metals, for example it can prevent the workpiece from rusting after water blasting rust removal.

This product forms a thin anti-rust film on the surface of iron parts, which has no irritating smell. It is simple to use and has remarkable effect. It is suitable for short-term rust prevention of ferrous metals, for example it can prevent the workpiece from rusting after water blasting rust removal.

It is suitable for cleaning oil stains produced by machining of pure aluminum and aluminum alloy products (such as oil stains caused by cutting oil, drawing oil, hydraulic oil, stamping oil, anti-rust oil and other industrial oils).

Dilute this product to about 3%-5% of the total volume. Use the diluted solution to clean at room temperature or higher temperature (the temperature should not exceed 60℃), and it can be cleaned manually or automatically. After using for a while, the cleaning effect will be reduced due to the consumption of the cleaning agent, so the original cleaner should be replenished accordingly.