This product is an eco-friendly water-based antirust agent with excellent antirust performance. It can effectively protect metal materials such as steel, iron, aluminum, copper, galvanized sheet, etc. It does not cause harm to people and the environment and can also be used as anti-rust additives.
①Excellent anti-rust performance. It can prevent rust formation for over six months.
②According to the different antirust time, different water dilution ratios are used. the application range is wide.
③It does not contain heavy metal salts such as nitrite, phosphorus and chromium, which is eco-friendly and harmless to the human body.
④Good film-forming properties. It can form uniform and continuous anti-rust protective film on the surface of the workpiece without leaving precipitation.
①It is suitable for rust prevention and sealing and rust prevention of cast iron, carbon steel, copper, aluminum and other metals.
②It is suitable for leak detection and pressure test treatment of pressure vessels and other equipment.
③It is suitable to be used as anti-rust additives for metalworking fluid products such as cutting fluid/cleaning agent.
①Before using this product, keep the surface of the workpiece clean, free of rust and grease. The workpiece can be cleaned with THIF-311 cleaning agent of our company.
②Prepare the anti-rust fluid with a concentration of 3%-15%. The concentration is determined by trials according to the duration of rust prevention, and the concentration can be increased or decreased according to the weather conditions. In harsh environments such as humid and rainy seasons, the concentration of antirust fluid should be slightly increased. The anti-rust effect would be better if Use distilled water or deionized water to prepare the solution.
③It can be used by soaking, spraying or brushing. Soak the workpiece in the antirust fluid for 1-5 minutes. it can be slightly shaken. the surface of the part should be fully coated, pay attention to the blind hole, and air dry or blow dry it after taking it out.
④Packing the workpiece can extend the period of rust prevention.
①Please wear latex gloves to avoid contact with skin for a long time.
②to avoid fingerprints, sweat stains and rust, it is strictly forbidden to carry the clean workpieces before and after coating with bare hands.
③Workpieces treated with this product should not be stored outside to prevent being wet by rain.
④The color of the product changes due to storage time, which will not affect its performance.
25KG, 200KG/barrel packaging. Plea
